You also need a new bracket, you can buy a 3D-printed version from us or print one yourself. With this laser head you do not need any movable bed, the lens part of this nozzle is movable and will set your focus in a breeze.
This kit contains
- One laser head with adjustable focus and air assist.
- One 1st and one 2nd mirror holder
- 4x screws to install the head
- 1x oring
Our version is different than the ones found on ebay!
- Optimized with better seal between the upper and lower chambers, extra o-rings and a optimized air assist input to prevent leaking air between the top and bottom surface aswell preventing a vortex beeing created inside the cone.
- Output hole drilled to prevent the beam from heating up the nozzle and make it easier to align.
- Springs changed to stronger ones to prevent mirror from vibrating in higher speeds
- All holes re-threaded with new corrosion free and lubed steel screws.
All products are tested before they are avalible for sale, ordering this laser head guarantee´s that you get only the best product!
This laser head nozzle is the only one we recommend due to the problems most of the nozzles have - you can read my article about it here!
Upgraded – Adjustable laser head kit with air assist – 12mm
From: € 99.00
Easy to set the focus with this adjustable laser head kit
- Do you have a question?
For 12mm lens and 20mm mirror (not included)
With this laser head you do not need any movable bed, the lens part of this nozzle is movable and will set your focus in a breeze.
Please note: You need a new bracket for this laser head, you cannot use the stock plate.
You can make your own, buy a 3D-printed version from us, or download the source files and print it yourself.
This kit contains
– One laser head with adjustable focus and air assist.
– One 1st and one 2nd mirror holder
– 4x screws to install the head
– 1x oring